机械传动 - 15 Mrz 2025
-片式离合器摩擦副热弹性不稳定性温度 压力扰动特性研究
3- ［ P（RR-RRR）SR ］运动学冗余并联机构动力学分析
残余应力对斜齿轮时变啮合刚度的影响及其动力学分析
装配误差和齿面摩擦影响下直齿轮啮合刚度建模与动力学响应分析
超声引导的股静脉穿刺机器人的设计和验证
细高齿齿轮齿根动应变计算及测试方法研究
基于中医推拿手法的柔性拍打装置设计
具有瞬态高精度正弦输出特性组合曲柄连杆机构的研究
行星轮滚针轴承组件变形和接触性能研究
基于多截面构造的实测误差齿轮啮合性能分析
弹流状态下深沟球轴承刚度阻尼研究
P2不同动力源激励下 构型混动汽车动力传动系统动态特性分析
混动汽车并联模式敲击异响分析及优化
弹簧滑块式弹跳机器人设计与弹跳性能研究
一种适用于刚性微型管道的变胞机器人
基于失效模式的齿轮有效硬化层深选择
爬壁机器人吸附方式机理及其应用
不确定扰动下的气动肌肉膝关节轨迹跟踪控制
基于三维点云的多指机械手抓取应用研究
基于热应力分布的制动盘制动力模型研究
基于振动特性分析的高速干切滚齿工艺参数优化研究
新型混合驱动智能仿人手设计
Research on thermoelastic instability and temperature- pressure perturbation characteristics of friction pairs in disc clutches
Meshing performance analysis of the measured gear with error based on the multi-section structure
Research on the combined crank linkage mechanism with transient high precision sinusoidal output characteristics
Dynamics analysis of the 3- [ P( RR- RRR)SR] kinematically redundant parallel mechanism
Research on deformation and contact performance of planetary gear needle roller bearing assembly
Design of flexible flapping devices based on traditional Chinese medicine massage techniques
Method of calculation and test of dynamic tooth root strain for high-contactratio spur gears
Research on stiffness and damping of the deep groove ball bearing under EHL conditions
Impact of residual stress on the time-varying meshing stiffness of helical gears and its dynamic analysis
Study on process parameter optimization of high-speed dry hobbing considering vibration characteristics
Mechanism and application of the adsorption mode for wall- climbing robots
Design and validation of ultrasound- guided femoral vein puncture robots
Mesh stiffness modelling and dynamic response analysis of spur gear pair with assembly error and tooth surface friction
Analysis of dynamic characteristics of power transmission system of the P2 hybrid vehicle under different power source excitation
Research on the braking force model of brake discs based on thermal stress distribution
A metamorphic robot suitable for rigid miniature pipelines
Selection of effective hardened case depth of gears based on the tooth failure mode
Design and bouncing performance study of spring slider type bouncing robots
Trajectory tracking control of the pneumatic muscle knee joint under uncertain disturbance
Application research of multi-finger robot hand grasping based on three-dimensional point cloud
Analysis and optimization of the gear rattle in the parallel mode for hybrid electric vehicles
Design of a new hybrid drive intelligent artificial hand
片式离合器摩擦副热弹性不稳定性温度 压力扰动特性研究
Research on thermoelastic instability and temperature-pressure perturbation characteristics of friction pairs in disc clutches
基于多截面构造的实测误差齿轮啮合性能分析1 基于NURBS曲面的数学模型
2 基于多截面的实测误差齿面模型的重构
5 结论
Meshing performance analysis of the measured gear with error based on the multi section structure
行星轮滚针轴承组件变形和接触性能研究
4
0
运动学冗余并联机构动力学分析
3
5
6
0
弹流状态下深沟球轴承刚度阻尼研究
EHL
5
6
0
残余应力对斜齿轮时变啮合刚度的影响及其动力学分析
4
0
具有瞬态高精度正弦输出特性组合曲柄连杆机构的研究
1
3
基于振动特性分析的高速干切滚齿工艺参数优化研究
基于热应力分布的制动盘制动力模型研究
P2不同动力源激励下 构型混动汽车动力传动系统动态特性分析
混动汽车并联模式敲击异响分析及优化
Analysis and optimization of the gear rattle in the parallel mode for hybrid electric vehicles
0 引言弹簧滑块式弹跳机器人设计与弹跳性能研究
一种适用于刚性微型管道的变胞机器人
Mesh stiffness modelling and dynamic response analysis of spur gear pair with assembly error and tooth surface friction
不确定扰动下的气动肌肉膝关节轨迹跟踪控制
新型混合驱动智能仿人手设计
3
4
0
基于失效模式的齿轮有效硬化层深选择
2
3
0
1
爬壁机器人吸附方式机理及其应用
2
3
4
5
at PressDisplay
Newspapers from China
Newspapers in Chinese (Simplified)